ROYAL 14FX CUSTOM
Work width x Height : 350 x 240mm
Feed motor : 3.7Kw
Front knife size : 500 x 66 x 9mm
Net Weight : 640Kgs
The ROYAL 14FX, an open side type surfacer, is capable of working wider workpiece up to 350mm. The turntable permits the bias angle to vary from 0º to 60º according to the workpiece.

ROYAL 18FX CUSTOM Work width x Height : 450 x 240mm Feed motor : 5.5Kw Front knife size : 640 x 66 x 9.5mm Net Weight : 1,140Kgs To strengthen the workpiece feeding capacity, the ROYAL 18FX has an enlarged body of heavy-duty construction. With the workpiece feed area so expaned, the ROYAL 18FX is capable of cutting a 450mm wide work at the maximum with stability.w

GT SLIDER Work width x Height : 250 x 180mm Knife bias angle : 42º fixed Feed motor : 2.2 Kw Head elevation motor 0.1 Kw Knife stock slide motor : 0.2 Kw Front knife size : 335 x 66 x 8 mm Net Weight : 590 Kgs Unique and patented "SLIDER" system employed which performs forward and return cutting with separate knives, which realizes the best finishing quality and also extends the life of the knives.

MX Pro-25 Work width x Height : 250 mm(40º) , 220mm (45º) x 240 mm Knife bias angle : 20º ~ 45º Feed motor : 2.2Kw Head elevation motor : 0.2 Kw Knife stock slide motor : 0.2 Kw Front knife size : 335 x 66 x8mm Net weight : 750 Kgs The Best Seller model of among our "SLIDER" series A combination of five cutting methods and four reciprocating frequencies can be selected by micro-computer control. This high perfomance machine provides a superior finishing by once putting the material. Unique and patented slider system, which performs forward and return cutting with separate knives, also extends the life of the knives. All operations, such as head uop/down, feed start/stop and discontinue of reciprocating are performed by foot-switch for excellent operability.

MX Pro-30 Work width x Height : 300 mm(35º) , 250mm (45º) x 300 mm Knife bias angle : 20º ~ 45º Feed motor : 3.7 Kw Head elevation motor : 0.2 Kw Knife stock slde motor : 0.2 Kw Front knife size : 370 x 66 x8mm Net weight : 815 Kgs A combination of five cutting methods and four reciprocating frequencies can be selected by micro-computer control. This high perfomance machine provides a superior finishing by once putting the material. Unique and patented slider system, which performs forward and return cutting with separate knives, also extends the life of the knives. All operations, such as head uop/down, feed start/stop and discontinue of reciprocating are performed by foot-switch for excellent operability.

MX Pro-35 Work width x Height : 350 mm(45º) x 300 mm Knife bias angle : 20º ~ 45º Feed motor : 3.7 Kw Head elevation motor : 0.4 Kw Knife stock slde motor : 0.4 Kw Front knife size : 500 x 75 x 8 mm Net weight : 1,200 Kgs A big & heavy duty super surfacing machine ! A combination of five cutting methods and four reciprocating frequencies can be selected by micro-computer control. This high perfomance machine provides a superior finishing by once putting the material. Unique and patented slider system, which performs forward and return cutting with separate knives, also extends the life of the knives. All operations, such as head uop/down, feed start/stop and discontinue of reciprocating are performed by foot-switch for excellent operability.

ULTRA WII Work width x Height : 250 x 180mm Feed motor : 2.2Kw x 2 Front knife size : 335 x 66 x8mm Net weight : 1,090Kgs Top planing and bottom planing performed by one machine. Since two knives, one for rough planing and one for finish planing are set at both of the top and bottom, both sides can be planed with just one workpiece feed. Therefore, planing time can be shortened considerably. It can also be built into a line. Variable bias angle system permits to choose the optimum bias angle to obtain the best finishing for the workpiece according to its hardness and moisture content.

NEWTON-W Work width x Height : 250 mm x 20mm Max. length : 300 mm Knife bias angle : 40º Feed motor : 5.5 Kw Conveyor belt motor : 0.1 Kw Front knife size : 335 x 66 x 8mm Net Weight : 670 Kgs NEWTON-W is a very unique machine that is developed to finish short & thin material like lamellas for chopsticks with high feed speed of 97 m/min.(50Hz). Double-knife system on top & bottom + special auto-return conveyor belt performs to plane both faces along with grains just by once putting the material.

RIGHT-AN 25 Work width x Height : 250 x 150mm Min.work width x Height : 10 x 10 mm Knife bias angle : 40º Side feed motor : 2.2 Kw Bottom feed motor : 2.2 Kw Side head motor : 0.1 kw Bottom head motor : 0.1 Kw Side front knife size : 335 x 66 x 8 mm Bottom front knife size : 335 x 66 x 8 mm Net Weight : 1,430 Kgs RIGHT-AN 25 performs to finish side & bottom face (right-angle) of the material at the same time with each double knife system.

CV-100BN Work width x Height : 1,000 x 400 mm Feed motor : 15Kw Feed speed : 8 ~ 40 m/min. Knife length : 1,150 mm Net weight : 9,600Kgs -An unique, four column type slicer for wide material upto 1,050mm. -Roller table for smooth slicing. -Specially designed for slicing resin & plastic.

CV-62A Work width x Height : 620 mm(45º) , 440mm (60º) x 180mm Knife bias angle : 0º ~ 60º Feed motor : 7.5 Kw Head elevation motor : 0.75 Kw Turn table motor : 0.1 Kw Front knife size : 880 x 85 x 9.5 mm Net weight : 3,020 Kgs An unique, four column type slicer for wide material upto 620 mm. Employed turn-table system for variable knife bias angle which can be adjusted according to the material. Most suitable for finishing ,for example, wider furniture parts etc.

CV-62B Work width x Height : 620 mm (40º), 440mm (60º) x 180mm Feed motor : 7.5 Kw Feed speed : 40 m/min. Knife length : 880mm Net Weight : 3,000 Kgs -An unique, four column type slicer for wide material upto 620mm. -Employed turn-table system for variable knife bias angle which can be adjusted according to the material. -Suitable not only for wooden material, but also for plastic and resin.

CV-100B Work width x Height : 1,050 mm x 240mm Feed motor : 15Kw Feed speed : 6 ~ 30m/min. Knife length : 1,150mm Net Weight : 5,000Kgs -An unique, four column type slicer for wide material upto 1,050mm. -Specially designed for slicing resin & linoleum.